Filter
Top Products
99
Speaker placement and connection
1 Connecting the Center speaker
2 Connecting the Surround speakers
3 Connecting the Subwoofer
Connect your subwoofer to the ED-205's SUBWOOFER PRE
OUT jack via an audio connection cable.
• From the SUBWOOFER PRE OUT jack, a monaural signal
that is a mixture of the Left and Right channel signals is
output.
• Use the ED-205's SUB WOOFER PRE OUT jack to connect
your Subwoofer, even if your amplifier also provides a
subwoofer connection jack.
• If your subwoofer does not have a built-in amplifier, connect
an amplifier to the SUBWOOFER PRE OUT jack and the
subwoofer to that amplifier.
IN
VIDEO-1
MONITOR
OUT
OUT IN
VIDEO-2
IN
VIDEO-1
IN OUT
PROCESSOR
FRONT SURROUNDOUT IN
VIDEO-2
SUB-
WOOFER
R L
SURROUND
CENTER
REMOTE
CONTROL
SUB WOOFER
PRE OUT
CENTER
R
L
S VIDEO
VIDEO
SPEAKERS
MULTI
CHANNEL INPUT
OUT IN
VIDEO-2
IN
VIDEO-1
MONITOR OUT
CAUTION:
SPEAKER
IMPEDANCE
6 OHMS MIN.
/SPEAKER
R L
SURROUND
CENTER
REMOTE
CONTROL
SUB WOOFER
PRE OUT
SPEAKERS
CAUTION:
SPEAKER
IMPEDANCE
6 OHMS MIN.
/SPEAKER
3 Subwoofer1 Center speaker
2 Left Surround
speaker
2 Right Surround
speaker
ED-205
Amplifier
Right Front speaker Left Front speaker
IN
VIDEO-1
MONITOR
OUT
OUT IN
VIDEO-2
IN
VIDEO-1
IN OUT
PROCESSOR
FRONT SURROUNDOUT IN
VIDEO-2
SUB-
WOOFER
R L
SURROUND
CENTER
REMOTE
CONTROL
SUB WOOFER
PRE OUT
CENTER
R
L
S VIDEO
VIDEO
SPEAKERS
MULTI
CHANNEL INPUT
OUT IN
VIDEO-2
IN
VIDEO-1
MONITOR OUT
CAUTION:
SPEAKER
IMPEDANCE
6 OHMS MIN.
/SPEAKER
R L
SURROUND
CENTER
REMOTE
CONTROL
SUB WOOFER
PRE OUT
SPEAKERS
CAUTION:
SPEAKER
IMPEDANCE
6 OHMS MIN.
/SPEAKER
ED-205
Amplifier
Subwoofer
• Follow the diagram below to connect each speaker as illustrated, observing the correct connections for R, L, + and -.
• Do not use unnecessarily long or extremely thin speaker cables.If the DC resistance of the speaker cables is too high, the
damping factor will decrease, adversely affecting the sound quality.
Speaker Impedance
This unit is designed to produce optimum sound quality when spakers with impedances within the specified ranges are connected.
Please check the following information and choose speakers with the necessary impedances for the connections.
CENTER SPEAKER : 6 ohms mim.
SURROUND SPEAKERS : 6 ohms mim./speaker