Onkyo CR-505 CD Player User Manual


 
15
Connecting -compatible Components
With (Remote Interactive) you can control your -
compatible Onkyo cassette tape deck or MD recorder with
the CR-505’s remote controller, and use the following spe-
cial functions:
Auto Power On
When you turn on a component connected via while the
CR-505 is in Standby, the CR-505 automatically turns on
and selects that component as the input source.
This function doesn’t work if the CR-505 is already on.
Direct Change
When you press the play button on a component connected
via , the CR-505 automatically selects that component
as the input source.
Auto Power Off
When you set the CR-505 to Standby, all components con-
nected via also enter Standby.
Controlling Other Components
Other components can be controlled with the supplied
remote controller (see “Remote Controller” on page 10).
CD Synchro Recording
An MD recorder or cassette tape deck connected via ,
and set to record pause, will start recording automatically
when CD playback is started on the CR-505.
Timer
The CR-505’s timers can be used to automatically start
playback or recording on a cassette tape deck or MD
recorder connected via (see “Timers” on page 28).
Sleep Timer
When you set the CR-505’s sleep timer, the sleep timers on
component connected via are also set, so all compo-
nents switch off after the specified period.
To use , you need to connect the CR-505’s connec-
tor to an connector on the other component by using an
cable. An cable is supplied with each -compat-
ible Onkyo cassette tape deck and MD recorder.
Hookup Example:
Notes:
Use only cables for connections.
To use
you must make an analog RCA/phono con-
nection between the CR-505 and the other component
even if they are connected digitally.
If a component has two connectors, you can connect
either one to the CR-505. The other connector is for con-
necting additional -compatible components.
Connect the CR-505’s connector only to Onkyo
components. Connecting to other manufacturer’s compo-
nents may cause them to malfunction.
Some Onkyo -compatible components may not sup-
port the special functions described above.
OUT OUT
SPEAKERS
RL
AM
FM
75
ANTENNA
PRE OUT
OPTICAL
DIGITAL
OUT
SUB
WOOFER
IN IN IN
REMOTE
CONTROL
TAPE LINEMD
R
L
R
L
L
R
(
REC
)(
PLAY
)
INPUT OUTPUT
REMOTE
CONTROL
OPTICAL
12
DIGITAL INPUT
L
R
ANALOG
L
R
L
R
L
R
L
R
(REC) (PLAY)
INPUT
MD
IN
OUTPUT
OUT
REMOTE
CONTROL
REMOTE
CONTROL
OPTICAL
1
DIGITAL INPUT
OPTICAL
DIGITAL
OUT
cable
Onkyo MD recorder
CR-505
To other
-compatible
component