Filter
Top Products
En-6
Positioning the XM Mini-Tuner System
You can check the signal strength of the XM radio signal
and adjust the position of the XM Mini-Tuner System
accordingly.
Notes:
• The XM information is only displayed when the Sat-
ellite Radio mode is set to XM or XM/SIRIUS (see
page 2).
• If you’re using both XM Satellite Radio and SIRIUS
Satellite Radio and the Satellite mode is set to
XM/SIRIUS (see page 2), signal strength meters for
both systems appear on the same screen.
1
On the AV receiver, press the
[SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [ ]/[ ]
buttons to select “4. Source
Setup,” and then press [ENTER].
The Source Setup menu appears.
Note:
If the Satellite Radio mode is set to
None (see page 2), the “4. Satellite
Radio” item is not available.
SETUP
TUNINGENTER
4. Source Setup
1. IntelliVolume
2. A/V Sync
3. Name Edit
4. Satellite Radio
TUNER
3
Use the Up and Down [ ]/[ ]
buttons to select “4. Satellite
Radio,” and then press [ENTER].
The Satellite Radio menu appears.
Adjust the position of the XM
Mini-Tuner Antenna so that the
SAT/TER signal strength bar is as
long as possible.
The best signal is achieved when the
antenna is pointing to the southern sky
through an unobstructed window.
Terrestrial (TER) signals are only avail-
able in certain areas.
So long as the signal strength is good,
you can enjoy XM Radio by using
either satellite or terrestrial reception.
4-4. Satellite Radio
Satellite Terrestrial
XM Antenna Aiming
TX-SR705_XM_EnFrEs.book Page 6 Wednesday, May 30, 2007 5:20 PM