Filter
Top Products
En-3
Selecting XM Radio Channels
There are three ways to select XM radio channels:
• Channel Search mode: select any channel.
• Category Search mode: select channels by category.
• Direct tuning: enter channel number.
Note:
You cannot select Channel Search or Category Search
mode while the Tuning Arrow indicators are
flashing, as tuning is in progress.
■ Channel Search Mode
■ Category Search Mode
■ Direct Tuning
You can select an XM radio channel directly by entering
its number.
1
Press the [RECEIVER] button,
followed by the [ENTER] button
to select “Channel Search”
mode.
2
Use the Up and Down [ ]/[ ]
buttons to select a channel.
You can also use the Left and Right
[ ]/[ ] buttons to select a category.
RECEIVER
D.TUN
ENTER
Number
buttons
ENTER
ENTER
Channel nameChannel number
1
Press the [RECEIVER] button,
followed by the [ENTER] button
to select “Category Search”
mode.
2
Use the Left and Right [ ]/[ ]
buttons to select a category, and
use the Up and Down [ ]/[ ]
buttons to select a channel in
that category.
1
Press the [RECEIVER] button,
followed by the [D. TUN] button.
The [RECEIVER] button flashes.
2
Within 8 seconds, use the num-
ber buttons to enter the channel
number.
The channel is selected.
For example, to select channel #20,
press 0, 2, 0, or 2, 0, [ENTER].
Note:
While the [RECEIVER] button is flash-
ing, the input source cannot be changed
by using the remote controller.
ENTER
ENTER
11 12
DVD
AUX
MULTI CH
GAME/TV
CBL/SATVCR/DVR
D. TUN
CD
TUNER
TAPE
0
CLEAR
123
456
789
TX-SR705_XM_EnFrEs.book Page 3 Wednesday, May 30, 2007 5:20 PM