Filter
Top Products
32
En
■ ID3-VER1
`READ (default)
`NO READ
This preference determines whether or not version
1.0/1.1 tags are read and displayed. When set to “NO
READ”, version 1.0/1.1 ID3 tags will not be displayed.
■ ID3-VER2
`READ (default)
`NO READ
This preference determines whether or not version
2.2/2.3/2.4 tags are read and displayed. When set to
“NO READ”, version 2.2/2.3/2.4 ID3 tags will not be
displayed.
■ CD-EXTRA
`AUDIO (default)
`MP3
This preference applies to CD Extra discs and
determines whether music in the audio session or
MP3/WMA files in the data session are played.
■ JOLIET
`USE SVD (default)
`ISO9660
This preference applies to MP3/WMA CDs in Joliet
format and determines whether the compact disc player
reads the SVD data or treats the disc as an ISO 9660
disc. Normally, this preference doesn’t need to be
changed. SVD (Supplementary Volume Descriptor)
supports long file and folder names and characters other
than letters and numbers.
■ STOP-KEY
`NAVI (default)
`FOLDER
`DISABLE
This preference determines how on the compact disc
player works.
When the “NAVI” (Navigation) option is selected,
pressing once selects Navigation mode.
When the “FOLDER” (ALL Folder) option is selected,
pressing once selects All Folder mode.
When the “DISABLE” option is selected, compact disc
player does not enter Navigation or All Folder mode by
pressing .
Note
• This setting has no effect on the remote controller.
■ ASb (Auto Standby)
`ON
`OFF
For compact disc player playback, it is activated when
the playback is stopped for 30 minutes; however, it is
not activated when the playback is paused continuously.
Default setting: ON (European models), OFF (North
American models)
Note
• Before entering standby mode with the ASb function, the
Display Off LED flashes 30 seconds before the ASb function
starts running.
■ INITIAL
`CANCEL
`EXECUTE
This preference resets the compact disc player to
factory default.
Switch the output between DIGITAL/ANALOG,
DIGITAL, ANALOG in order.
EXTRA
ASb (Auto Standby)
INITIAL
Setting the Analog/Digital Output
1
Press OUTPUT MODE repeatedly on the front
panel.
The selected Audio output indicator lights.
`DIGITAL/ANALOG (default):
Uses both outputs.
`DIGITAL:
Uses the digital output only.
Turn the analog output off to perform more
stable playback.
`ANALOG:
Uses the analog output only.
Turn the digital output off to reduce the effect of
digital noise during playback.
OUTPUT MODE
Audio output indicator