Filter
Top Products
17
3.0 Presets
The Tuner Configurator software is an important setup tool for
easily setting tuner presets and loading them on the NV-
T2FAM-EX non-volitile memory prior to the installation.
NuVoNet will automatically read the presets and make them
available on the Control Pads.
3.1 Preset Information (Fig. 31): This section provides a display
name, band and tuning frequency for each preset. As the
preset information fields are populated, the same information
will automatically fill the highlighted fields to the left. Each of
the 5 available banks of presets will hold 20 separate AM or FM
channel selections. The default setting will show two available
banks of 20 with the default names, My Presets 1 and My
Presets 2 .
When the AM or FM bands are selected and a station name is
typed into the Name field, the Frequency dialer will
become active. As you scroll up and down the frequency list,
the highlighted Frequency column to the left will
automatically populate.
Favorite: This check box will add any highlighted preset to the
Favorites menu on the Control Pads. Up to 20 can be selected
for each tuner band. When a preset is selected, it will appear in
the far right column labeled Favorites . Any preset can be
added or removed from the list by highlighting the preset and
selecting or deselecting the Favorite box.
Fig. 31
3.2 Add Bank (Fig. 32): If you want to add a bank of 20 presets,
the Add Bank button will bring up a window that allows you
to name the bank and automatically add it to the Tuner’s
presets.
Fig. 32
3.3 Rename Bank (Fig. 33): This button allows you to give a
bank of presets a customized name.
Fig. 33