Numark Industries TT-1650 Stereo System User Manual


 
PAGE 5
SETUP & INSTALLATION
This turntable has been designed exclusively for DJ use and can be setup in a variety of different ways
depending on your mixing style. The turntable should rest on a level and stable surface that is clear of
obstructions. If a mixer is placed between two turntables make sure that there is at least ¼" (7mm)
between the mixer and the turntables to prevent damage to the turntables and to reduce unwanted
system noise.
There are many variations of these setups. Find the best setup that works for your mixing style by
experimenting with different turntable and mixer placements. It is strongly recommended that the top
mixer surface and the top flat surface of the turntable be at the same level.
SETUP & INSTALLATION
Setup Style 1 (traditional)
Best For:
Long mixes and blending
techniques
Mixer
¼" ¼"
Mixer
¼" ¼"
Setup Style 2 (battle style, scratching)
Best For:
Scratching, cutting and aggressive
mixing techniques
85 mm
Mixer
Mixer