Numark Industries CDN90 CD Player User Manual


 
CDN90
MOVING LOOP POINTS: The “LOOP IN” point
can be moved while the music is playing
just by pressing
at the new desired
point. The next time “LOOP OUT” is
reached the CD will return to this new
“LOOP IN” point. If “LOOP IN” is press
after the “LOOP OUT” point it will clear the
“LOOP OUT” point.
The “LOOP IN” point can also be edited
while paused. First hold down
then
press
to move to the loop in point.
Next rotate the wheel to search for a new
cue point and then press
again to set
the new point. Check your point by
pressing
.
The “LOOP OUT” point can also be moved while
a loop is playing. Press
to release the old
“LOOP OUT” point and pressing it again at the new desired point.
RELOOP/STUTTER This button performs 2 different functions depending on loop setting.
Reloop is only possible if “LOOP” points have been
previously set. The “RELOOP” function automatically
returns the music to the “LOOP IN” point and will play
the loop until it is released with the “LOOP OUT”
button.
Stutter starts instant play from previously set “Hot”
points. Simply set your stutter (Hot Start) point by
follow the directions for setting loop in because the
points are the same. Remember the button serves
also for the reloop function so if a loop out has
been set the unit will also loop until released.
This function lets you set 3 Hot Start points. The first
is based on the “PLAY” cue point and the second two
are based upon “LOOP IN”. Since the default “LOOP
IN” points are also the initial start point your unit can
be “stutter” started from up to 3 buttons.
NOTE: The CD Player will always remember a new set “Hot” points until you actually set a new “LOOP IN” point
or put in a new CD. The new point will be accessible until you remove the CD from the unit. If you change
tracks and you previously set a “Loop In” on another track, pressing
will jump to that point.
- The Leader in DJ Technology
©2002 Numark Industries - 15 - http://www.numark.com