Numark Industries CDN90 CD Player User Manual


 
CDN90
ADJUSTING PITCH
Pitch Range: actives the pitch slider and adjusts the amount of control the pitch slider has on the overall speed of
music. On depression of
will toggle the slider on and off. Range adjustments of 6, 12, 25, and
100% can be achieved by holding down
and then pressing to cycle through the range
options. This setting will be remembered at power down.
Pitch Slider: By moving the slider toward the front the speed of the music speeds up. By moving away the speed
slows down. With 100% control the music can be stopped or play at 2 times original speed. To match the
speeds of two units you can either monitor the music of both units by ear or use the automatic BPM
readout and adjust the pitch to match. When the tempo of the music of the CD you wish to match is slow
compared to the tempo of the other music, move the slider to the (+) end and match the BPM. When
faster, move the pitch slider to the (-) end. By making this adjustment the speeds will be matched though
the beats may not yet be aligned.
Pitch Bend: Buttons and Jog Wheel: Allows the user to temporarily change the speed of the
music to align beats. When the beats of the music of the CD you wish to match is fast
compared to the tempo of the other music press the
or rotate the jog wheel counter
clockwise (to the left). When SIDE 2 is behind press the
or rotate the jog wheel
clockwise (to the right). The pitch changes temporarily while the
or button is being
pressed or the jog wheel is rotated. The faster you rotate the wheel or the longer you hold
the buttons the more you change. Releasing the button or wheel results in a return to the
original pitch.
MATCHING THE BEATS PER MINUTE (BPM)
Match the tempo by monitoring the music of 2 CD sides by ear or look at the BPM readout and adjusting the pitch. When
the tempo of the music of the selected CD side is slow compared to the tempo of the other side, move the slider to the “+” side and
match the BPM. When faster, move the pitch slider to the “-“ side. The following description is for the case of matching the pitch of
side 2 to the pitch of the music being played on side 1.
- The Leader in DJ Technology
©2002 Numark Industries - 11 - http://www.numark.com
Press “PLAY” on Side 1
Press “PLAY” on Side 2
Listen to Side 2 or look at
the BPM display
Speed Up Side 2 Slow Down Side 2
if Side 2 is slow if Side 2 is fast
compared to Side 1 compared to Side 1
USING PITCH BEND
If you find the BPM’s (Beats Per Minute or Tempos) are the same, however, the drum beats are not matched you will need
to temporarily change the pitch. This description is for the case of matching the beat of Side 2 to the beat of the music being played
on Side 1.
After matching the BPM’s, as described above, adjust the pitch temporarily as follows:
or or
When Side 2 is behind rotate the jog wheel clockwise When Player 2 is ahead rotate the jog wheel counter-
clockwise or press
to bend pitch slower. or press to bend pitch faster
The pitch changes automatically while the jog wheel is rotated. The faster you rotate the wheel the more you change.
Releasing the wheel results in a return to the original pitch.