Operation
12
Bluetooth profile. If your phone does not support this profile, start the
playing in the audio player function on your phone.
To play a specific track, select it in the audio player of your phone. See
the user guide of your phone for details.
To select the next track, press the fast forward key. To select the
previous track, press the rewind key once if the player is stopped or
twice if a track is playing.
To pause the audio player, press the stop key. To restart it, press the call/
play key.
To stop the audio player, press the stop key twice.
To listen to the radio, press the music key.
■ Listen to the radio
The FM radio of the headset can be used even without connecting the
headset to a phone.
If you receive a call while listening to the radio, the radio is muted until
the call ends.
To switch on the radio when the headset is on, press the music key
twice, if your phone supports the General Audio/Video Distribution
profile. If your phone does not support this profile or the headset is not
connected to a phone, press the music key once. When the radio is on,
is shown on the headset display.
To search for radio channels, press and hold the fast forward or rewind
key for a few seconds. To stop searching for new channels, press the stop
key. To fine tune a found channel, press the fast forward or rewind key.
To save a found channel in the headset memory, press the call/play key.
To select a saved channel and listen to it, press the fast forward or
rewind key.
To switch off the radio, press the music key or stop key.
To change from the default FM radio frequency range (87.5 to 108 MHz)
to the 76 to 91 MHz range (used in Japan), press and hold the fast
forward and rewind keys for 3 seconds.
HS_12W_UG_draft7-4.fm Page 12 Tuesday, May 17, 2005 1:10 PM