Filter
Top Products
ENGLISH
Pair and connect the headset
Before using the headset, you must
pair and connect it to a compatible
device.
If your mobile device supports the
A2DP Bluetooth profile and has a
music player feature, you can use the
device to also play music through the
headset.
If your mobile device does not support
the A2DP profile, you can separately
pair the headset with the mobile
device and a music player that
supports this profile. If you have
paired and connected the headset to
your mobile device, disconnect the
headset from it before pairing the
headset with the music player.
To pair and connect the headset to
your device if the device supports the
Near Field Communication (NFC)
feature, activate the feature, and use
your device to touch the area shown
in figure 10 at the start of this guide.
For details on NFC, see the user guide
of your device.
To pair and connect the headset to
your device if the device does not
support NFC:
1. Ensure that your mobile device or
music player is switched on and
the headset is off.
2. If the headset has not been
previously paired with a device,
switch on the headset. The headset
enters pairing mode, and the blue
indicator light starts to flash
quickly.
If the headset has been previously
paired with a device, ensure that
the headset is switched off, and
press and hold the power key (for
about 8 seconds) until the blue
indicator light starts to flash
quickly.