Nokia BH-505 Headphones User Manual


 
ENGLISH
Get started
The headset contains the following
parts shown on the title page:
indicator light (1), cover of the
charger connector (2), power key (3),
answer/end key (4), earplugs (5),
volume key (6), rewind/fast-forward
key (7), microphone (8), and play/
pause key (9).
Before using the headset, you must
charge the battery and pair the
headset with a compatible device.
Parts of the device are magnetic. Metallic
materials may be attracted to the device.
Do not place credit cards or other
magnetic storage media near the device,
because information stored on them may
be erased.
Charge the battery
Before charging the battery, carefully
read “Battery and charger
information”.
Warning: Use only chargers
approved by Nokia for use
with this particular model.
The use of any other types may invalidate
any approval or warranty, and may be
dangerous. Use of unapproved chargers
may present a risk of fire, explosion, or
other hazard.
When you disconnect the power cord of
any accessory, grasp and pull the plug,
not the cord.
1. Connect the charger to a wall
outlet.
2. Lift the cover of the charger
connector from the edge, and
connect the charger cable to the
connector. The red indicator light is
displayed during charging.
Charging the battery fully may take
up to 2 hours.
3. When the battery is fully charged,
the green indicator light is