Filter
Top Products
3. Locate the on/off buttons on the SS-4/SS-6 which correspond
to the speaker pairs you wish to play. Set them to the ON position.
4. Turn on the amplifier or receiver and select a source, such
as the tuner or CD player.
5. Slowly turn up the amplifier or receiver volume and set it to
a comfortable (not maximum) listening level. Be careful not to
overdrive or “clip” your amplifier. If the sound becomes
muddy or distorted, you have reached the limit of your ampli-
fier’s volume capability and should quickly reduce the volume
to avoid damaging your speakers.
6. To turn off one or more speaker pairs, simply press the corre-
sponding on/off button(s) on the SS-4/SS-6. Refer to the
Protection chart for the correct setting of the Protection button.
13
S
PEAKER
S
ELECTION
S
YSTEM
Features and Benefits
The SS-4/SS-6 offers a number of improvements over other
speaker selectors:
• Power handling: 100 watts per channel RMS
• Protection circuit safeguards receiver/amplifier
• Separate left and right ground paths for compatibility with
all amplifiers, including bridged designs
• Removable screwless connectors accommodate up to
14 gauge wire
• Rugged all metal chassis construction
• Non-skid feet won’t scratch furniture and ensure unit stability
during operation
• 72 adhesive-backed room identification labels
• Requires an amplifier that is compatible with a 4 ohm load
• Warranty: Ten-year limited
• Dimensions: 8-1/2" wide x 2" high x 6-3/4" deep (SS-4);
11-1/2" wide x 2" high x 6-3/4" deep (SS-6)
• Shipping weight: approximately 4 lbs (SS-4); 5 lbs (SS-6)
2
S
PEAKER
S
ELECTION
S
YSTEM
TECH
SUPPORT
HOTLINE
If you have questions
regarding the
operation of the
Niles SS-4/SS-6,
contact your local
Niles dealer or Niles
Customer Service at
1-800-289-4434.
DS00359ACN/SS-4/SS-6 Printer 11/19/03 5:09 PM Page 13