Filter
Top Products
17
NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 1-760-710-0992
16 CHANNEL, FULLY CONFIGURABLE POWER AMPLIFIERS
CONFIGURING YOUR SYSTEM
The SI-1650 includes a Conguration and Setup Tool that provides easy access
to the all essential features of the amplier using the web browser on a laptop,
PC, iPad , tablet or smartphone (e.g. IE, Firefox, Chrome, Safari, etc.).
CONNECTING FOR CONFIGURATION
A direct wired Ethernet connection or a local area network connection to the RJ-
45 network connector on the rear panel of the SI-1650 is necessary to access the
SI-1650 Conguration and Setup Tool using a web browser.
DIRECT ETHERNET CONNECTION
A direct Ethernet connection is made by connecting the RJ-45 network connector
of a PC directly to the RJ-45 network connector on the rear panel of the SI-1650.
Use the numbered steps below to establish network communication between a
PC and the SI-1650 when using a direct wired Ethernet connection.
Note: A crossover network cable is not required when using a direct wired
Ethernet connection as the SI-1650’s network connector is auto sensing.
Windows XP
1. Select Windows Control Panel > Network Connections.
2. Right click Local Area Network and select properties.
3. Highlight Internet Protocol (TCP/IP) in the connections list and
then select properties.
4. Set a unique IP address compatible with the factory default IP address
http://192.168.1.1 (e.g 192.168.1.220)
5. Set Subnet to 255.255.255.0
Windows 7
1. Select Windows Control Panel > Network and Internet > Network and Sharing
Center.
2. Select Change Adapter Settings.
3. Right click Local Area Connection and select Properties.
4. Highlight Internet Protocol Version 4 (TCP/IPv4) in the connections list
and then select Properties.
5. Set a unique IP address compatible with the factory default IP address
http://192.168.1.1 (e.g 192.168.1.220)
6. Set Subnet to 255.255.255.0