Filter
Top Products
14
PAINTING THE LOUDSPEAKER
If you are using an applicator or brush and a can of paint, thin the paint first. Thick
paint will tend to clog the grille holes. To ensure a uniform appearance, paint the
front and back of the grille.
Replacing the Grille
Carefully fit the grille into its recess so that it is barely in place. Starting with one
corner, go around the speaker, pushing the grille in a little bit each time. You should
be gentle, the aluminum grille can be bent easily out of shape. You will feel a
positive “snap” when it is in place.
DS00427ACN_OS_3Si.qxp 12/20/04 5:52 PM Page 13