Filter
Top Products
56
15. TROUBLESHOOTING
Malfunction Possible Cause Remedy
Studio flash
won't work in
slave or auto
mode.
1. Unreliable contact
in camera sync
terminal or studio
flash.
2. Damaged cable
connecting studio
flash and "M" socket.
3. Unreliable contact
with control panel
sockets or in splitter
connected to studio
flash.
1. Make sure
that camera
sync terminal is
operable and its
contact with
flash is reliable.
2. Replace
cable.
3. Test cable and
"M" connector
contact on
control panel for
reliability; make
sure that
required splitter
contact is
connected to
sync terminal.
to contents