Filter
Top Products
37
9. ROTATION SPEED ADJUSTMENT MODE
5. In «S» mode the digits indicate the
number of seconds required for the turn
table to move from one frame to another;
e. g. «8» means that it takes 8 seconds for
the turntable to move from one frame to
the next one.
6. In order to switch over from the “S” mode
to any other operation mode press the
“Mode” button on the control panel. The
“S” mode operation completed the turnta
ble rotation stops. The determined speed
value is used for further operation.
Figure 9.5
Figure 9.6