Filter
Top Products
31
Stereo Music System
FM broadcast is supposed to be in stereo, but sound
is monaural.
- Verify that antenna is connected properly.
- Press and hold down the Mono button (for at least 1 second)
to end mono mode.
................................................................................................
FM or AM broadcasts cannot be received.
- Adjust position and/or orientation of antenna.
- Verify that antenna is connected properly.
................................................................................................
FM or AM broadcast reception is noisy.
- Adjust position and/or orientation of antenna.
- Increase distance between this unit and other electrical equip-
ment.
Troubleshooting
Remote control cannot be operated.
- Verify that power is supplied to the unit.
- Verify that batteries are inserted properly.
- Replace both batteries with fresh ones.
- Point remote control at sensor when operating.
- Remove any obstacles between remote control and the main
unit.
- Do not operate remote control units of other equipment at
the same time.
................................................................................................
“E-MECHA” indication appears.
- Turn the unit off and then on again.