Filter
Top Products
10
Stereo Music System
Notes
- Be sure to disconnect the power cords for this system and all
other audio equipments from the AC outlets before making
connections.
- Never insert shorting pins, pin cords, or the like on unused
terminals. The system may cease to put out sound or shorts
could cause breakdown.
- The white terminal on this system is the left channel audio
terminal and the red terminal is the right channel audio ter-
minal.
Connections
System Connections
1. Connect the cables from the rear of the speaker units to the
left and right Speaker terminals on the rear of the main unit.
2. Connect the 5-pin connector for the power supply unit to
the Power Input terminal of the main unit.
3. Connect the AM antenna and FM antenna. (Page 11-12.)
4. Connect the source equipment. (Page 13.)
5. When all the equipment has been connected, connect the
power cable to the power supply unit and plug the power
cable into a receptacle.
SoundSpace 5
Speaker
R
SoundSpace 5
Speaker
L
Power Input
L
R
Digital Output
Speaker
(Impedance 4Ω)
Subwoofer
Output
Speaker Unit (R) Speaker Unit (L)
Main Unit
Power Supply Unit
To Power Input terminal
To Speaker L terminal
To Speaker R terminal
Power Supply Cable
To AC outlet