Filter
Top Products
SPECIFICATIONS
1. POWER OUTPUTS (R.M.S)
70 Watts (35W + 35W) /4Ω x 2
0.1% (T.H.D) @ 1KHz
2. TOTAL HARMONIC DISTORTION
Main Amp ≤ 0.05% @1KHz
Mic Ch ~ Main Amp ≤ 0.1% @1KHz
3. FREQUENCY RESPONSE
± 3dB, 20Hz ~ 20KHz @ 1W/4Ω (Speaker Output)
± 3dB, 20Hz ~ 20KHz @ +4dB/10Ω (Mixer Stereo Output)
4. INPUT LEVELS
MIC CH ..........................................................................-55dBv
LINE CH..........................................-20dBv / -50dBv (PHONO)
TAPE IN ........................................................................ -20dBv
AUX RETURN .......... -20dBv @ Rs = 150Ω (20Hz ~ 20KHz)
5. HUM & NOISE
≤ -80dB ("A" FILTER)
6. REMAINING NOISE
≤ -85dB ("A" FILTER)
7. INPUT CHANNEL EQUALIZATION
MIC, LINE, & PHONO INPUTS:
EQ
HIGH (Shelving) ......................................12KHz / ±15dB
MID (Bell)................................................2.5KHz / ±12dB
LOW (Shelving)..........................................80Hz / ±15dB
8. HEADPHONE OUTPUTS
200mW
9. PROTECTION
TURN ON MUTING .................................................... ~ 1 SEC
TURN OFF MUTING ..................................................INSTANT
10. PHANTOM POWER
+48VDC, globally selected
11. POWER REQUIREMENTS
As Noted on Unit ........................115VAC/60Hz, 230VAC/50Hz
12. POWER CONSUMPTION
140W
13. FUSE
115VAC Operation ..................2.0A SLO-BLO, 5x20mm, 250V
230VAC Operation ..................1.0A SLO-BLO, 5x20mm, 250V
14. DIMENSION (W x H X D)
9.9” x 4.5” x 9.6” (252 x 115 x 245 mm)
15. WEIGHT
9 lbs (4.1 Kg)
14
The specifications are as above at the time of printing this manual. For improvement purpose, all specifications, design and apperance
subject to change without prior notice.