8
Specications
EQUALIZER:
Equalizer Control Bands
1X31, 1/3 Octave ISO Spacing From 20Hz to 20KHz
2X31, 1/3 Octave ISO Spacing From 20Hz to 20KHz
2X15, 2/3 Octave ISO Spacing From 25Hz to 16KHz
Filter Type
Constant Q
Slider Travel
20mm (Center Detent) for GEQ 131/215/231
Level Control Range
+/-12dB
INPUTS:
Type
Active Balanced/Unbalanced
Connectors
3-Pin XLR, 1/4” TS (Balanced)
Impedance
40K Ωs Balanced; 20K Ωs Unbalanced
Maximum Level
28dBV
OUTPUTS:
Type
Unbalanced
Connectors
3-Pin XLR, 1/4” TRS
Impedance
Typically < 400 Ωs
Maximum Level
+/-20dBV
Clip LED Threshold
3dB (Below Clipping)
Low Cut Filter
40Hz, 12dB/octave
Frequency Response
20Hz - 20KHz, +/- 1dB
THD + Noise
<0.008% (@ 1KHz, all faders at mid position)
Signal to Noise Ratio
95dB (@ 1KHz)
Channel Separation
60dB (1KHz)
Line Voltage
100-130V AC, 50/60Hz
Power Consumption
Maximum: 15 watts
SIZE:
19” W X 3.5” H X 5” D (2U)
(48.2cm X 8.8cm X 12.7cm) For 231
19” W X 1.75” H X 8.66” D (1U)
(48.2cm X 4.4cm X 12.7cm) For GEQ 131/215
WEIGHT:
4.15lbs. (1.9Kg.) GEQ 215
4lbs. (1.81Kg.) GEQ 131
6.85 lbs. (3.1Kg.) GEQ 231
The specifications above are correct at the time of printing of
this manual. For improvement purposes, all specifications for
this unit, including design and appearance, are subject to
change without prior notice.