10
The output level routed to the Stereo Outputs and REC Outputs is
determined ultimately by the setting of the Master Mix Gain
Control (29). The Master Mix (signal on the master bus) is the
sum of the signals routed from all the channels and also the
inputs from the AUX return bus and the TAPE Input (15). Use the
Tape/Rec to Master switch (24) to route signals from the Tape
Input (15) to the Master Mix Gain Control (29). The level of
signal routed to the Master Mix Gain Control (29) from DAT, tape
decks, CD players, etc., input to the Tape Input (15) is
determined by the setting of the output volume control of the
audio device being connected, so care must be taken in adjusting
this level so as to achieve proper balance in the final mix and to
CONTROLS AND CONNECTIONS
(18)
(19)
prevent overload distortion. The 10-stage LED Output Meter (21)
displays the Master Mix output level.
c. Digital Echo Effects Function and Operation
(27) EFFECTS DISPLAY
(28) ECHO EFFECT SELECT BUTTONS
(31) EFFECT SEND
(32) EFFECT (ECHO) RETURN
(33) EFFECT GAIN
The built-in DSP (Digital Sound Processor) offers 16 different
preset level and echo intervals selectable by the Echo Effect
Select UP/DOWN buttons (28). Press either button to scroll in
(20)
(22)
(23)
(24)
(25)
(26)
(21)
(27)
(28)
(29)
(31)
(32)
(33)