Filter
Top Products
A3.2 Integrated Amplifier Instructions for use Page 9 of 9
SPECIFICATIONS
Issue 3: March 2002
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice
Power output at 1kHz for 0.5% distortion: 115 Watts per channel into 8 ohms
Total harmonic distortion 1kHz: < 0.007%
Frequency response 10Hz to 20kHz ± 0.3dB
Channel separation: > 85dB 20Hz to 20kHz
Input sensitivity line inputs: 300mV, 200k ohms
phono input MM 3.5mV, 47k ohms
phono input MC 350µV, 47k ohms
Signal / noise ratio line inputs: > 103dB ‘A’-weighted,
(ref.120 Watts, 8 ohms ) > 95dB unweighted
phono MM: > 96dB ‘A’-weighted
> 89dB unweghted
phono MC: > 88dB ‘A’-weighted
> 82dB unweighted
Power requirement: 100 / 115 / 230Volts AC 50 / 60Hz
(factory pre-set)
Power consumption: 400 Watts maximum
Dimensions: 440 mm wide
95 mm high including feet
400 mm deep including terminals and volume knob
Weight: 12.5kg unit only, unboxed
14.5kg in shipping carton
Standard accessories IEC type mains lead
Remote control (universal)
2 batteries (type SUM-4, AAA, LR03)
A3.2
Dual Mono Integrated Amplifier