Filter
Top Products
A3.2 Integrated Amplifier Instructions for use Page 5 of 9
REMOTE CONTROL
Issue 1: March 2002
REMOTE CONTROL
The blue buttons on the remote control enable main functions of the amplifier to be operated
from a convenient distance. Remaining buttons on this universal handset are for use with other
Musical Fidelity products, and have no effect on the A3.2 Integrated amplifier.
Equivalent buttons on the remote handset have the same functions as those on the front panel of
the unit.
As the remote control uses an invisible infra-red light beam, the transmitter must be pointed
directly towards the receiver window on the front of the amplifier, without visual obstruction
between them.
Pressing the volume-up or -down buttons on the remote handset will advance the motorised
volume control in the required direction.
The MUTE button mutes the SPEAKER output and PRE-OUT sockets. To show that the
amplifier is muted, the blue LED in the volume control knob goes out. Press the MUTE button
again to cancel mute function, and the blue LED will light again.
If the range of the remote control greatly decreases, replace the batteries with new ones.
Do not mix old and new batteries - two are required, type SUM-4, AAA or LR03.
VOLUME (UP)
VOLUME (DOWN)
MUTE button
TUNER input select
PHONO pickup
input select
AUXILLIARY 1
input select
CD input select
TAPE input select
AUXILLIARY 2
input select