Filter
Top Products
dmc3-4
www.mssystems.com | 800.421.1587 | 5
Tune the Radio
To tune a radio station:
1. Press POWER to turn on the music.
2. Select FM or AM. See Music Settings/Music Source for instructions.
3. Use TUNE UP or TUNE DOWN to find a station. If you press and release, within
1
second, TUNE UP or TUNE DOWN, the tuner goes into Seek Mode and finds the
next station with a strong signal. If you press and hold TUNE UP or TUNE DOWN,
the tuner goes into Scan Mode and scans all frequencies until you release the button.
Note: For the first two seconds, the tuner scans at slow speed to allow for fine
tuning. After two seconds, the tuner scans at fast speed.
Preset Radio Stations
To preset radio stations:
1. Press POWER to turn on the music.
2. Select FM or AM. See Music Settings/Music Source for instructions.
3. Use TUNE UP or TUNE DOWN to find a station. See Tune the Radio above for
seek and scan functions.
4. Simultaneously press TUNE UP and TUNE DOWN to enter Store Preset mode.
The display shows PRESET and a preset number.
Figure 3—Preset Radio Stations
∧
TUNE
|0|.
A
UTO
TIME
PRESET
POWER
TONE
SOURCE
∧
VOLUME
∨
LISTEN TALK
DOOR TALK
∧
TUNE
∨
FM
PRESET
03
2. Select AM or
FM
1. Turn music on
3. Find a
radio station
4. Enter Store Preset
mode
5. Select preset numbe
r
#QEG#QEG ".".