Filter
Top Products
dmc1
www.mssystems.com | 800.421.1587 | www.mssystems.com
Page
15
Powering Up The dmc1
After all connections have been made, insert the power plug into the
transformer and secure the master to the wall housing using the 2 screws
provided. If using the dmc1F frame with a dmc1CD player, install the
master unit over the frame. Do not over tighten the screws as the plastic
may distort or crack. Install the speaker panel on the master as shown in
figure 22.
Please be careful to only apply pressure on the speaker panel at the
corners and not in the middle. Check all functions by following the
guidelines in the Owners Manual shipped with the master unit. If any
difficulties are encountered, recheck all connections. If after reviewing
these instructions and you are unable to resolve any problems, contact
technical support at 1-800-421-1587.
Figure 22 - DMC1 speaker cover installation