Filter
Top Products
26
Remote Trigger Connections
Connect one end of the 1/8"-to-1/8" mono mini cable (included) to the remote output of your
receiver/preamplifier.
Connect the other end of the 1/8"-to-1/8" mono mini cable (included) to the remote trigger input
of the MPA 5150.
If your are using more than one Monster Power Amplifier, connect the remote trigger out from the MPA 5150
to the trigger in on additional Monster power amplifiers. Should your receiver or preamplifier not have a remote
trigger out, the 12V power transformer can be plugged into the “switched” AC outlet on the back of your receiver
or preamplifier.
Should you have another component in your system that uses a 12V trigger in, you can connect the remote trigger
output of the MPA 5150 to the remote trigger in of this component.
1.
2.
3.
4.
UNBALANCED
INPUT
4
(RIGHT REAR)
RAER THGIR 4 LENNAHC
FUSE 15A SLOW 120V
FUSE
8A SLOW 240V
IN AC/DC 3-30V
OUT DC 12V
REMOTE TURN ON/OFF
From Receiver/Preamplifier
Remote Trigger Ou
t
To
Additional Monster
Power Amplifiers