Filter
Top Products
STEP 3
Selecting Speakers
NOTE
The selector buttons on the front panel enable you to engage or disengage the speaker pair they correspond to.
If you want to adjust the volume of each speaker pair individually, you must use separate volume controls.
For maximum performance, we recommend using Monster Cable
®
Stereo Volume Control.
A) Turn on your amp or receiver and select a source (e.g, CD player).
B) Adjust the volume control to the desired level. Remember, if you’re not using separate volume controls
for each speaker pair, you can’t individually adjust the volume level. So, the volume you set on your amplifier
will determine the volume level for each speaker pair throughout the house.
C) Press the selector button on your speaker selector which corresponds to the speaker pair you wish to use.
For example, if you want to use the speakers connected to Speaker 1, Speaker 2, and Speaker 3, press those buttons.
D) To disengage all other connected speaker pairs, deselect each speaker pair’s corresponding selector button.
5
6