Filter
Top Products
Ancillary Equipment
All Monitor Audio loudspeakers present an easy, efficient load and are
compatible with most good quality amplifiers.
Implementation of the latest design and construction techniques offer
equal suitability to the demands of both current and future digital and
analogue formats.
Monitor Audio’s power handling figures are based upon undistorted
speech and music signals.
All Monitor Audio loudspeakers are primarily intended for use in a
normal domestic environment. Provided you do not overdrive your
amplifier or make excessive use of bass or treble boosts, you should
never damage either the amplifier or loudspeakers.
(High quality components are utilised to produce these loudspeakers
ensuring accurate reproduction of the signal fed to them, so it is
important to appreciate that the ancillary equipment used will
profoundly affect performance).
If distortion is evident when the volume level is increased this is a sign
of overdriving and the volume level should be reduced immediately.
Used properly, loudspeakers will rarely fail and if both units reproduce
the same fault or distortion, then it is likely that the problem is
elsewhere in the system. In such instances please contact your dealer
immediately.
13
© Monitor Audio Ltd 2001