Monitor Audio 45 Speaker User Manual


 
Radius
HD
4
Introduction
Congratulations and thank you for your purchase of the Radius
HD
loudspeakers. We are confident they will provide
years of enjoyment and pleasure as only high quality components have been used throughout.
Building on the overwhelming success of the original Radius Series, Radius
HD
brings redesigned cabinet profiles,
enhanced cabinet structure, improved aesthetics and improved sonic balance and response.
The R270
HD
has received major performance enhancements in every area. We have increased the cabinet volume,
added an additional rear firing port and also added ballast in the bottom of the cabinet. All of these new features
combined to offer improved, tighter, punchier bass response and extra cabinet stability.
The R45
HD
and R90
HD
come supplied with a wall fixing bracket. This enable upto 18 degrees of movement in all
directions.
We have also introduced a new product to the Radius
HD
Series, the R one
HD
. The R one
HD
is a left, centre, right in
one cabinet. Each channel is enhanced with it’s own braced compartment and individually specified crossovers.
Designed to fit below/ above your TV where the centre channel would normally sit, additional left and right speakers
are not needed as the R one
HD
houses all three in one.
Please follow this user manual carefully as it contains important information about positioning and set up procedures.
For further advanced information on system set-up, FAQ’s and multi-lingual support please refer to our web site at:
www.monitoraudio.co.uk
The R45
HD
has a thermal protection device in it. This is help to protect the drive unit and tweeter from
permanent damage. If the speaker stops working after a long period of play, turn off the source for about
10 minutes, and then try it again.