SS-150THX satellite speaker
page 6
"INPUT" terminal labelled "1", and the Negative ( — ) lead from your amplifier or receiver should be connected to the
BLACK ( — ) "INPUT" terminal labelled "2". See Figure 2 on Page 5.
TRIPOLE OR DIPOLE OPERATION
To operate in the Tripole mode, the jumper between the terminals labelled "3" and "4" must be in place. To
operate the speaker in the THX Dipole mode, the jumper between the terminals labelled "3" and "4" must be removed.
Do not throw away or lose this jumper. See Figures 3 and 4 on page 6.
VERY IMPORTANT:
The sensitivity of the speaker is slightly higher in the Tripole position. For critical listening, when
switching from one mode to another, you should re-calibrate the level of the surround channels.
Disconnect the
Jumper between
terminals 3 and 4
MADE IN USA
SS-150
THX
TRIPOLE
SURROUND SPEAKER
MILLER & KREISEL
SOUND CORPORATION
10391 Jefferson Boulevard., Culver City, CA 90232
Voice (310) 204-2854 Fax (310) 202-8782
Manufactured under license from Lucasfilm Ltd.
U.S. Patent Nos. 5,043,970; 5,109,416; 5,189,703;
and 5,222,059. Foreign patents pending. Lucasfilm
and THX are registered trademarks of Lucasfilm Ltd.
INPUT
4 ohms
FOR TRIPOLE
OPERATION:
install jumper
between
terminals
3 and 4
DO NOT CONNECT YOUR
AMPLIFIER TO TWO RED
TERMINALS.
1
3
2
4
FOR THX
(DIPOLE)
OPERATION:
remove jumper
between
terminals
3 and 4
Connect your
amplifier to
terminals
1 and 2.
For remote control operation,
see your owner's manual.
AMPLIFIER
RIGHT SURROUND
+
_
+
_
LEFT SURROUND
FIGURE 3
WIRING THE SS-150THX FOR THX (DIPOLE) OPERATION
(one channel only is shown for clarity)
FIGURE 4
WIRING THE SS-150THX FOR TRIPOLE OPERATION
(one channel only is shown for clarity)
MADE IN USA
SS-150
THX
TRIPOLE
SURROUND SPEAKER
MILLER & KREISEL
SOUND CORPORATION
10391 Jefferson Boulevard., Culver City, CA 90232
Voice (310) 204-2854 Fax (310) 202-8782
Manufactured under license from Lucasfilm Ltd.
U.S. Patent Nos. 5,043,970; 5,109,416; 5,189,703;
and 5,222,059. Foreign patents pending. Lucasfilm
and THX are registered trademarks of Lucasfilm Ltd.
INPUT
4 ohms
FOR TRIPOLE
OPERATION:
install jumper
between
terminals
3 and 4
DO NOT CONNECT YOUR
AMPLIFIER TO TWO RED
TERMINALS.
1
3
2
4
FOR THX
(DIPOLE)
OPERATION:
remove jumper
between
terminals
3 and 4
Connect your
amplifier to
terminals
1 and 2.
For remote control operation,
see your owner's manual.
AMPLIFIER
RIGHT SURROUND
+
_
+
_
LEFT SURROUND
Connect the
Jumper between
terminals 3 and 4