Filter
Top Products
20 3. TV Features
ChannelView Channel Listings
ChannelView displays program descriptions sent by
broadcasters. This information may be unavailable
in some areas.
About ChannelView
ChannelView TM shows memorized channels on the ANT
input. It displays channel names and program information
for digital channels. No program information is displayed
for analog channels.
ChannelView allows you to set up three banks of custom
channels for convenient access. You can save groups of
channels by content (e.g., news, sports, children's program-
ming) or by TV user.
Note: You must first set the TV Clock to receive cor-
rect ChannelView listings. Use the Setup >
Clock menu.
ChannelView Custom Channel Banks
Select a channel bank to customize.
1o Press GUIDEto display ChannelView.
Press MENUto move the highlight to the bank
header.
3o Press • • to select Bank 1, 2, or 3.
4, With the bank name highlighted, press ENTERto
enter setup mode where you can select channels to
include in the bank.
ChannelView "All" tab. Programs are listed on the right.
Using ChannelView Listings
Display/hide
ChannelView listings
(ANT input only).
Move through channels
one by one.
Move through channels
quickly.
Jump to listings for a
specific channel.
Tune to a highlighted
channel.
Update program infor-
mation for a highlighted
digital channel.
Display program descrip-
tions, if available. The
description will appear at
the bottom of the screen.
Display more program
description for the current
channel (if available).
Press GUIDE.
Press • or V.
Press and hold CH.
Enter the channel number.
Press CANCELonce to add a
dash; press CANCELtwice to
clear the channel number.
Press ENTER.
Press the INFOkey (the
screen may briefly go
blank).
1. Press • to move into
the program area.
2. Press • • to move
between programs.
Press INFO.
Move between banks
Move into the channel list
Add or delete a channel
from the bank
Press • •.
Press •.
• Highlight the channel
and press ENTER.A
check indicates the
channel has been
added.
• Press ENTERagain to
clear the check and
remove the channel.
Remove all channels Press CANCEL.
from the selected bank
Enter or exit setup mode Press MENU.
Press EXITwhen finished with setup.
Using Custom Channel Banks
While watching TV, press CH. The TV will tune only
to channels stored in the current bank.
To change to a different channel bank:
1. Press GUIDE.
2. Press MENU.
3. Press • • to highlight the desired bank.
4. Press EXIT.
To allow tuning to any channel in memory, select
the All bank.
For assistance call 1(800) 332-2119