Filter
Top Products
owners manual
7
REMOTE CONTROL
Use the remote to control the sound as you move around the room. The LED indicator on the
OmniVibe will flash quickly when receiving a signal from the remote.
USING YOUR iPOD
• iPod navigation controls are fully functional while your iPod is docked in the system.
• The iPod volume jog wheel changes the headphone volume only. It has no effect on the
OmniVibe system volume.
BATTERY REPLACEMENT
• Replace the remote control battery when it stops operating (normally every year or two), or
its range seems reduced.
• Use 1 x CR2025 3-volt lithium battery.
• Keep in mind that lighting and other room conditions, in addition to battery age, can affect
the operating range of an infrared remote control.
TO CLEAN THE SYSTEM
The MIRAGE OmniVibe has a delicate high gloss surface. Wipe the system using a soft dry
cloth. You can also lightly vacuum the grille.
• Do not use solvents, chemicals, or sprays.
• Do not allow liquids to spill or objects to drop into any openings.
• Press to turn on and off your OmniVibe.
• Press once to skip to the next track. Press and hold
to scan forward quickly through a track.
• Press once to return to the beginning of the current
track or twice to skip to the beginning of the previous
track. Press and hold to scan backward quickly through
a track.
• Press once to pause play; again, to resume it.
• Turn on your iPod and press to adjust the
system volume. Press and hold for faster adjustment.
• Press to mute and unmute your iPod