Filter
Top Products
Model GXT5000 Series
Page 11 www.midlandradio.com
Select “on” by pressing the buttons and push the PTT key, or press
MENU button to move to the next feature setting.
To turn the ROGER BEEP tone off, press the MENU button until the icon
appear on the display, while on the right an “on” icon appears. Select “oF”
by pressing the buttons and push the PTT key, or press MENU button
to move to the next feature setting.
SILENT OPERATION
Your GXT5000 Series has a SILENT OPERATION mode. In this mode, all
“beeps” and “tones” are disabled.
To turn the SILENT OPERATION mode on, press the MENU button until
the display shows an “bP” icon while on the right of the “bP” display, an
“on” icon appears. Select “of” by pressing the buttons and push the
PTT key or MENU button.
To turn the SILENT OPERATION mode off, press the MENU button until
the display shows an “bP” icon while on the right of the “bP” display, an
“oF” icon appears. Select “on” by pressing the buttons and push the
PTT key or MENU button.
CALL ALERT SELECTION
Your GXT5000 Series has 5 selectable CALL ALERTS. To select, press
the MENU button until a “CA” icon appears and to the right of the “CA” icon
the current CALL ALERT setting is displayed. Then press the buttons
to make the CALL ALERT selections, the radio will emit a corresponding
tone for each selection. To confirm, press the PTT button or press MENU
button to move to the next feature setting.
TIME OUT
TIMER
Your GXT5000 has a TIME OUT TIMER function to limit the time you can
transmit continuously. To select, press the MENU button until a “to” icon
appears on the display, and to the right an “oF” icon appear. Then press
the buttons to select the TIME OUT time between “15”, “30”, “45”, “60”,
and “90” seconds. To confirm, press the PTT button or press MENU button
to move to the next feature setting.
When TIME OUT TIMER function is on, the radio will automatically stop
transmitting once you reached the selected TIME OUT time and go to
standby or receive mode until you release the PTT button and press it
again to resume transmission.
/
/
/
/
/
/