Filter
Top Products
7
CHAPTER 1: INTRODUCTION
HOW TO USE THIS MANUAL
Make sure to read these operating instructions in their
entirety before configuring a loudspeaker system with
HMS-10s. In particular, pay close attention to material
related to safety issues.
As you read these operating instructions, you will encounter
the following icons for notes, tips, and cautions:
NOTE: A note identifies an important or useful
piece of information relating to the topic under
discussion.
TIP: A tip offers a helpful tip relevant to the topic
at hand.
CAUTION: A caution gives notice that an
action may have serious consequences and
could cause harm to equipment or personnel, or
could cause delays or other problems.
Information and specifications are subject to change.
Updates and supplementary information are available at
www.meyersound.com
.
Meyer Sound Technical Support is available at:
■ Tel: +1 510 486.1166
■ Tel: +1 510 486.0657 (after hours support)
■ Web: www.meyersound.com/support
■ Email: techsupport@meyersound.com
HMS-10 SURROUND LOUDSPEAKER
Meyer Sound's HMS-10™ is a full-range, two-way loud-
speaker optimized for surround channels in cinemas,
theatres, and re-recording stages. The self-powered
HMS-10 maintains a wide dynamic range, full fidelity, and
complete clarity during the most demanding of digital
soundtracks. As part of the EXP line of cinema products, the
HMS-10 is optimized for use with other EXP loudspeakers,
including the Acheron
®
screen channel loudspeakers.
Boasting a wide frequency range of 55 Hz to 18 kHz and a
maximum peak SPL of 126 dB at 1 meter with very low dis-
tortion, the HMS-10 ensures that the full intensity and
nuance of cinema surround channels reach each listener
without compromise.
The HMS-10’s transducers include a 10-inch low-frequency
long excursion cone driver and a 2-inch diaphragm high-fre-
quency compression driver on a symmetrical constant-
directivity 80-degree horn that delivers exceptional cover-
age. The proprietary drivers — designed and manufactured
at Meyer Sound's headquarters in Berkeley, California — are
powered by two channels of onboard amplification that
include an active crossover, driver protection, and frequency
and phase response correction circuitry.
!
HMS-10 Surround Loudspeaker (Shown without Grille)