Filter
Top Products
6
4. Software organization
The ScanPall2 software system consists of three modules:
• The Kernel module
• The System (Operating System) module
• The Program module
4.1. Kernel Module
The Kernel module forms the heart of the system. It is extremely secure and always protected
by the system. Only a failure of the flash memory or incorrect switching off of the power supply,
during system restart after a kernel update, can destroy the kernel. The Kernel module
guarantees that the user can always download his program, even when the operating system
has been damaged by the user program.
The Kernel module allows the following operations to be performed:
• Program Download
• Update Kernel
• Test & Calibrate
• Version
For further information, refer to section 5.4.
4.2. System Module
The System module is the operating system. It allows the following operations to be performed:
• Memory
• Settings
• Reader
• Battery
• Test
• Download
• Version
For further information, refer to section 5.3.