Filter
Top Products
17
3. Reader
Tests the scanner read performance and displays the bar code read, its length, and a letter
identifying the code type (symbology).
The symbologies enabled by default are as follows:
Symbology Identifier
Code 39 ...................................... A
Industrial 2/5 .............................. D
Interleaved 2/5............................ E
Codabar...................................... G
Code 93 ...................................... H
Code 128 .....................................I
UPCE without Addon...................J
EAN8...........................................M
EAN13/UPCA without Addon..... P
The other symbologies must be enabled by programming.
4. Battery
• Main
Displays the voltage of the replaceable batteries or the rechargeable battery.
An icon, representing the battery, is permanently displayed on the screen, thus making
it possible to view the charge state. When the battery icon is completely empty, the
batteries should be replaced or the rechargeable battery recharged.
• Backup
Displays the voltage of the backup battery.
5. Test
• Buzzer
Tests the buzzer by means of the emission of different frequencies and durations.
Press the key to start or stop the test.
• LCD & LED
Tests the LCD screen and the dual-colour LED.
Press the key to start or stop the test.