Mesa/Boogie 100 Stereo Amplifier User Manual


 
Your Mesa/Boogie Amplifier is a professional instrument. Please treat it with respect and operate it properly.
USE COMMON SENSE AND ALWAYS OBSERVE THESE PRECAUTIONS:
Do not expose amplifier to moisture, rain or water, direct sunlight or ex-
tremely high temperatures.
Always insure that amplifier is properly grounded.
Always unplug AC power cord before changing fuse or any tubes.
When replacing fuse, use only same type and rating.
Avoid direct contact with heated tubes.
Insure adequate air circulation behind amplifier.
Keep amplifier away from children.
Be sure to connect to an AC power supply that meets the power supply
specifications listed on the rear of the unit.
If there is any danger of lightning occurring nearby, remove the power plug
from the wall socket in advance.
To avoid damaging your speakers and other playback equipment, turn off
the power of all related equipment before
making the connections.
Do not use excessive force in handling control buttons, switches and
controls.
Remove the power plug from the AC mains socket if the unit is to be stored
for an extended period of time.
Do not use solvents such as benzene or paint thinner to clean the unit.
Wipe off the exterior with soft cloth.
Be sure to have the warranty card filled out by the store at which it was
purchased and return to Mesa/Boogie.
YOUR AMPLIFIER IS LOUD! EXPOSURE TO HIGH SOUND VOLUMES MAY CAUSE
PERMANENT HEARING DAMAGE!
No user serviceable parts inside. Refer service to qualified personnel. Always unplug AC power
before removing chassis.
EXPORT MODELS: Always insure that unit is wired for proper voltage. Make certain grounding conforms
with local standards.
READ AND FOLLOW INSTRUCTIONS OF PROPER USAGE.