Filter
Top Products
To connect the G68ADV, G68AXV, or G68XXV to an audio/video recorder or second zone
Video recorder
G51 Receiver Zone 3
MONITOR IN ZONE 3
S-VIDEO IN
ANALOGUE IN
COMP
ANALOGUE
OUT
S
ZONE 2
ZONE 3
G68ADV/AXV/XXV
COMMS
ANALOGUE IN
A4
TAPE OUT
COMMS
PHONO LEADS
PHONO LEADS
PHONO LEAD
S-VIDEO LEAD
COMMS LEAD
Installing the
digital surround
controller
21
The G68 can copy the currently selected audio and video inputs
to two different outputs, called COPY ZONE 2 and ZONE 3, for
recording, or for controlling one or two other rooms. For example, a
G51 Receiver could be used in a second room to listen to a source
connected to the G68.
To record audio and video
•Connect the appropriate COPY/ZONE video and audio outputs to
the video and audio inputs of the VCR.
•Connect the video and audio outputs from the VCR to
appropriate inputs on the G68.
To control a second room
•Connect the ZONE 3 outputs to ANALOGUE IN 4 on the G51.
•Connect the composite ZONE 3 outputs to the TV or monitor in
ZONE 3.
•Configure the G51 for a second zone.
For more information see the
Meridian Three Room Plus
guide at
www.meridian-audio.com.
G Series DSP 21 31/10/03, 4:24:04 pm