Filter
Top Products
Video outputs
The following table gives details of the video outputs (G68ADV, AXV, and XXV only):
Use this output To connect to this
MAIN OUT
The composite video input of a TV or monitor, using a 75Ω coax cable with phono
connectors.
COPY ZONE 2, ZONE 3 COMPOSITE OUTPUTS
The composite video input of a video recorder or second zone inputs, using a 75Ω coax
cable with phono connectors.
MAIN S-VIDEO OUTPUT The S-video input of a TV or monitor, using an S-video cable.
COPY ZONE 2, ZONE 3 S-VIDEO OUTPUTS The S-video input of a video recorder, using an S-video cable.
COMPONENT OUT
The component video input of a TV or monitor, using a 75Ω coax cable with phono
connectors.
Video inputs
The following table gives details of the video inputs:
Use this input To connect to this
V1 (VCR), V2 (TV), V3 (CAB), V4 (GAME)
The composite video output of a video source, using a 75Ω coax cable with phono
connectors.
S1 (DVD), S2 (VCR), S3 (SAT), S4 (AUX) The S-video output of a video source, using an S-video cable.
Y1 (DVD), Y2 (CABLE), Y3 (SAT)
The component video output of a video source (interlaced or HD), using a 75Ω coax
cable with phono connectors.
The default assignment of sources to each input is shown in brackets after the input name in the above table. To assign a different input to
a source see
Configuring sources
, page 30.
Installing the
digital surround
controller
18
There is no format conversion for the main outputs. However, there
is conversion from S-video to composite for the ZONE 2 and 3
composite outputs.
G Series DSP 18 31/10/03, 4:24:01 pm