Filter
Top Products
17
CD CHANGER
CD PROGRAM ( CD MEMORY )
1. In CD stop mode, press the MEMO / C-ADJ button to
select the program number appears on the display.
2. The track number, program number and MEMORY
indicators will flash.
4. Press the MEMO / C-ADJ. button to store the track
number you selected into the CD program, and the CD
program number shows on LCD display.
5. Select another track number and store the track into
the CD program by above step 3 to step 4.
NOTE: Up to 40 CD tracks (00 ~ 39) can be programmed.
6. After the CD program has been done, press the PLAY
/ PAUSE button to start playing the programmed tra-
cks.
7. In CD stop mode, Press MEMO/C-ADJ and then STOP
/ MEMO DN button on the front panel or remote con-
trol to erase program.
NOTE: When the CD program has been done, you can
only play the memory tracks. Unless you erase the CD
program, the CD normal playing can not be resumed to
do.
Total remaining time of current disc
Total playing time of current disc.
3. Select the number of disc by pressing the DISC SKIP
button, and press the TUNING UP / NEXT or TUNING
DOWN / PREVIOUS button until the desired track
number that you wish to program appears on the dis-
play.
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5