Memorex MX5520SPKA CD Player User Manual


 
14
TURNTABLE
PHONO PHONO
CONTROLS AND FEATURES
1. Turntable platter
2. Cueing lever
3. Speed selector
4. Tone arm
5. Tone arm rest
6. 45 rmp Adaptor
PLAYING A RECORD:
1. Switch the system on using the POWER button.
2. Remove the stylus cover.
3. Unlock the tone arm using the tone arm lock.
4. Use the function selector to select the PHONO / AUX
position.
5. Set the speed selector to either 33 rpm or 45 rpm
according to the recordd to be played.Use the 45 rpm
sprindle adaptor to play 45 rpm records which do not
have a cente.
6. Place a record on the turntable. Using the cueing lever,
raise the tone arm. Move the tone arm outwards, away
from the turntable platter. The turntable platter will start
to rotate.
7. Move the tone arm over the record and release gently
lower the Cueing Lever, The stylus will lower onto the
record and start to play.
8. Adjust the VOLUME control to obtain the desired
listening level.
9. Adjust the graphic equalizer to suit your listening
pleasure.
10. During play(if you wish so) move the tone arm inwards
towards the center of the turntable platter, thus switching
it off, Ensure the tone arm is replaced and locked
correctly using the tone arm lock. This will avoid damage
to the stylus when the record deck is not in use.
11. When the record has finished playing, the turntable platter
will switch off automatically. Secure tone arm using the
tone arm lock.
NOTE: If you input signal from AUX jack while Phono is
playing, you may hear both simultaneously.
!!
"#
!
"
#
$