Memorex MX4501 Stereo System User Manual


 
8
OPERATING INSTRUCTIONS
SETTING THE CLOCK
While the unit is at the standby
mode (the clock appears in the
display and the backlight is dimly
lit), press and hold the
PROGRAM/MEMORY/CLOCK
SET button; "24" or "12" will blink
in the display.
1
1
Press the PROGRAM/MEMORY/
CLOCK SET button and the hours
will blink.
1
3
Press the SKIP/TUNING o 1 or
n 2 button to set the unit to the
24 hour (24H) mode (also known
as military time), or 12 hour (12H)
mode.
2
1
2
Press the SKIP/TUNING o 1 or
n 2 button to set the current hour
(making sure to also set the
correct AM/PM setting if in 12H
mode), then press the
PROGRAM/MEMORY/CLOCK
SET button 3 again; the minute
digits will blink.
2
1
3
4
Press the SKIP/TUNING o 1 or
n 2 button to set the current
minute. Press the PROGRAM/
MEMORY/CLOCK SET button
3
and the time will be set.
2
1
3
5
To enhance the overall bass
sound, press the BASS BOOST
button; the BASS BOOST
indicator will light. Press again for
normal bass sound; the BASS
BOOST indicator will go out.
1
1
BASS BOOST
To listen to the unit through
headphones, simply insert the
headphones (not included) into
the Headphone jack. The
speakers will be disconnected
when the headphones are
plugged in.
1
1
HEADPHONE JACK
BACKLIGHT
While the unit is on Standby
mode, the backlight will light
dimly. While the unit is on, the
backlight will light brightly.