Filter
Top Products
15
How to use the Remote Control
How to use the Remote Control
The Remote Control is capable of performing basic Oper-
ating Functions for the MCD301 SACD/CD Player.
Notes: 1. Refer to the “How to Operate” Section of this man-
ual for additional information using this Remote
Control.
2. The translucent Remote Control Push-buttons
will illuminate for approximately 3 seconds when
activated.
Play
With a disc loaded, press the PLAY Push-button to start
the disc playing.
Stop
Press the STOP
Push-button to stop disc playback and
return to displaying the table of contents of the disc.
Numbered Push-buttons
Press 1 through 9 to directly access one of the first nine
Disc Tracks using the Front Panel Information Display. For
track numbers greater than 10, press the +10 Push-button
followed by the 0-9 Push-button. For example, to access
Disc Track 23, press the +10 Push-button twice and then
the 3 Push-button.
Pause
Press the PAUSE
Push-button to temporarily stop disc
playback at any time. Press the PLAY Push-button to
resume playback.
REV and FF
Press the REV (Reverse)
or FF (Fast Forward) Push-
button to start moving rapidly through a track on the disc.
When the desired location is reached release the REV
(Reverse) or FF (Fast Forward) Push-button to resume
normal playback.
Back and Next
Press the NEXT
Push-button to move forward one track
or the BACK Push-button to move back to the begin-
ning of the current track playing.
Note: If the BACK Push-button is pressed during play-
back of the first three seconds of the track, the MCD301
will start playing back the previous track from the
beginning. If the Front Panel Information Display is
indicating time the display will momentarily indicate the
track number.
SACD/CD
Press to select the SACD or CD Tracks from a hybrid disc
for playback.
Display/Time
Press the DISPlay/TIME Push-button to access various
disc times. It is also used to return the Front Panel Infor
-
mation Display to indicating time instead of text informa-
tion on a SACD Disc.
Menu/Text
Press to select the various text information on a SACD
Disc such as Album, Artist and Track Titles (disc depen
-
dent).
Repeat Modes
Press the RPT (Repeat) Push-button to select either One
Track, All Tracks or cancel the Repeat Mode.
Program
Press the PGM (Program) to activate the Program Mode to
playback only certain disc tracks in the desired order.
Review
Press the RVW (Review) Push-button to review the Pro
-
grammed Tracks from the disc on the Front Panel Informa-
tion Display, while in the Program Mode.
Clear
Press the CLEAR Push-button to erase a program track(s).