Filter
Top Products
12
8. Appendix A - Technical Specifications
CX5
Frequency
response:
50Hz-30kHz (+/-3dB);
-10dB at 50Hz
Crossover
frequency:
2.6kHz
Low-frequency
amplifier power:
50 watts with 14 gauge wiring to this transducer
High-frequency
amplifier power:
40 watts with 14 gauge wiring to this transducer
LF cutoff Flat, 80Hz, and 100Hz
MF boost In/Out of 2dB centered at 2kHz
HF trim +2dB, 0dB, -2dB above 3kHz
Acoustic space 0dB, -2dB, and -4dB
Maximum
signal-to-noise
(dynamic range):
> 97 dB (typical A-weighted)
Polarity: positive signal at + input produce outward LF cone displacement
Input impedance: 20k ohms balanced,
10k ohms unbalanced
Input sensitivity: 100 mV pink noise input produces 92 dBA output SPL at one meter with volume control at
maximum
Power: factory programmed for either 115V ~50/60Hz or
230V ~50/60Hz
Protection: RF interference, output current limiting, over temperature,
turn-on/off transient, subsonic filter, external mains fuse
Cabinet: Front and rear baffle 1” MDF with ¾” MDF wrap. Black lacquer paint on enclosure with soft
touch black paint on curved front plate.
Size: 13” (H) x 7.5” (W) x 9” (D); 33cm x 19cm x 23cm
Weight: 16.75 lbs./unit; 7.60 kg
* Above specifications subject to change without notice