MartinLogan Center Channel speaker Speaker User Manual


 
The Theater hybrid speaker system consists of a broad-range
single element electrostatic transducer integrated with a
quick-response woofer. This approach takes advantage of
the benefits that both technologies have to offer. Dispersion
is a controlled 30 degrees. This was achieved by curving
the electrostatic transducer element itself, an elegantly
simple solution.
System Frequency Response
70–22,000 Hz ± 3 dB
Dispersion
30 degrees
Sensitivity
90 dB/2.83 volts/meter
Impedance
Nominal: 4 ohms, Minimum: 3.1 ohms @ 140 Hz
Crossover Frequencies
300, 3000 Hz
Woofer Type
Two 6.5” (16.5cm) magnetically shielded. Non-resonance
asymmetrical chamber format.
CLS
TM
Mid-Range
Patented CLS
TM
(curvilinear line source) electrostatic transducer
High Frequency Drivers
Three 1” (2.7cm) soft dome, controlled dispersion array
Power Handling
250 watts rms
Weight (With Mount)
57 lbs. (26kg)
Size (Without Mount)
43 inches W × 11.5 inches D × 10.5 inches H
(109.2cm W × 29.2cm D × 26.7cm H)
Size (With Mount)
43 inches W × 11.5 inches D × 13 inches H
(109.2cm W × 29.2cm D × 33cm H)
Your Theater speaker is provided with an automatic Limited
90 Day Warranty coverage.
You have the option, at no additional charge, to receive a
Limited 5 Year Warranty coverage. To obtain the Limited
5 Year Warranty coverage you need to complete and return
the Certificate of Registration, included with your speakers,
and provide a copy of your dealer receipt, to MartinLogan
within 30 days of purchase.
MartinLogan may not honor warranty service claims unless
we have a completed Warranty Registration card on file!
If you did not receive a Certificate of Registration with
your new Theater speaker you cannot be assured of having
received new units. If this is the case, please contact your
authorized MartinLogan dealer.
Service
Should you be using your MartinLogan product in a country
other than the one in which it was originally purchased,
we ask that you note the following:
1. The appointed MartinLogan distributor for any given
country is responsible for warranty servicing only on
units distributed by or through it in that country in
accordance with its applicable warranty.
2. Should a MartinLogan product require servicing in a
country other than the one in which it was originally
purchased, the end user may seek to have repairs performed
by the nearest MartinLogan distributor, subject to that
distributor’s local servicing policies, but all cost of
repairs (parts, labor, transportation) must be born by
the owner of the MartinLogan product.
3. If, after owning your speakers for six months, you
relocate to a country other than the one in which
you purchased your speakers, your warranty may be
transferable. Contact MartinLogan for details.
General Information 21
GENERAL INFORMATION
Warranty and RegistrationSpecifications