Filter
Top Products
Typical 100V line system
Note that each channel of the line amplifier should be capable of delivering power equal to the sum
of all loudspeaker transformers connected to that channel.
In the above example, there are ten 100V, 30W AQ5TX30s connected to each channel so the
amplifier must be capable of delivering 10 x 30W per channel = 300W per channel in 100V line
operation mode.
If the loudspeakers there were ten AQ10TX150s connected to each channel, the amplifier would
need to be capable of delivering 10 x 150W per channel = 1500W per channel in 100V line
operation mode.
All material © 2007. Martin Audio Ltd. Subject to change without notice.