Support User Manuals

Martin Audio AQ Series Speaker User Manual

Open as PDF

of 49

AQ Series powering recommendations (See later for line transformer versions)

AQ Series Loudspeaker Quantity Recommended amp Nominal impedance Minimum impedance

AQ5 (set for 4 ohms)

1 MA200Q or MA900 4 ohms 3.2 ohms

2 in parallel MA200Q or MA900 2 ohms 1.6 ohms

AQ5 (set for 16 ohms)

1 MA2.8s 16 ohms 12.8 ohms

2 in parallel MA2.8s 8 ohms 6.4 ohms

3 in parallel MA2.8s 5.3 ohms 4.2 ohms

4 in parallel MA2.8s 4 ohms 3.2 ohms

5 in parallel MA2.8s 3.2 ohms 2.6 ohms

6 in parallel MA2.8s 2.67 ohms 2.1 ohms

7 in parallel MA2.8s 2.29 ohms 1.8 ohms

8 in parallel MA2.8s 2 ohms 1.6 ohms

AQ6 (standard)

1 E1300 or MA1400 8 ohms 6.4 ohms

2 in parallel E1300 or MA1400 4 ohms 3.2 ohms

3 in parallel E1300 or MA1400 2.67 ohms 2.1 ohms

4 in parallel E1300 or MA1400 2 ohms 1.6 ohms

AQ6 (16ohm version)

1 MA2.8s 16 ohms 12.8 ohms

2 in parallel MA2.8s 8 ohms 6.4 ohms

3 in parallel MA2.8s 5.3 ohms 4.2 ohms

4 in parallel MA2.8s 4 ohms 3.2 ohms

5 in parallel MA2.8s 3.2 ohms 2.6 ohms

6 in parallel MA2.8s 2.67 ohms 2.1 ohms

7 in parallel MA2.8s 2.29 ohms 1.8 ohms

8 in parallel MA2.8s 2 ohms 1.6 ohms

AQ8

1 MA1400 or MA1.6s 8 ohms 6.4 ohms

2 in parallel MA1400 or MA1.6s 4 ohms 3.2 ohms

3 in parallel MA1400 or MA1.6s 2.67 ohms 2.1 ohms

4 in parallel MA1400 or MA1.6s 2 ohms 1.6 ohms

AQ10, AQ12

1 MA2.8s 8 ohms 6.4 ohms

2 in parallel MA2.8s 4 ohms 3.2 ohms

3 in parallel MA2.8s 2.67 ohms 2.1 ohms

4 in parallel MA2.8s 2 ohms 1.6 ohms

AQ15

1 MA4.2S 8 ohms 6.4 ohms

2 in parallel MA4.2S 4 ohms 3.2 ohms

3 in parallel MA4.2S 2.67 ohms 2.1 ohms

4 in parallel MA4.2S 2 ohms 1.6 ohms

AQ210 subwoofer

1 MA2.8s 4 ohms 3.2 ohms

2 MA2.8s 2 ohms 1.6 ohms

AQ112 subwoofer

1 MA4.2s 8 ohms 6.4 ohms

2 in parallel MA4.2s 4 ohms 3.2 ohms

3 in parallel MA4.2s 2.67 ohms 2.1 ohms

4 in parallel MA4.2s 2 ohms 1.6 ohms

AQ212, AQ215 subwoofer

1 MA4.2s 4 ohms 3.2 ohms

2 in parallel MA4.2s 2 ohms 1.6 ohms

For best performance, configurations shown in red should be avoided unless a strict budget dictates otherwise.

Although Martin Audio MA and E Series power amplifiers work well down to 2 ohms, other power

amplifiers often suffer sonic degradation or, worse still, shut down into low impedances. Always

check your intended power amplifier’s specifications and conduct listening tests before committing

to a very low impedance system design.

All material © 2007. Martin Audio Ltd. Subject to change without notice.

previous next