Filter
Top Products
13
ENGLISH
GENERAL INFORMATION OF RC7300SR
TO SR7300
To control the SR7300 by your RC7300SR, you have to select the
device AMP or TUNER by function selector button. Please refer as
below for the details in AMP and TUNER mode.
POWER ON/OFF Turns the SR7300 on and off
POWER ON Turns the SR7300 on
POWER OFF Turns the SR7300 off
V-OFF Turns on or off Video OFF mode
EQ Turns on or off HT-EQ mode
7.1/6.1 IN Selects the 7.1CH IN
SLEEP Sets the sleep timer function
A/D Switches between the analog and digital inputs
DISP./RDS Changes the front display mode
Surround mode Selects the surround mode
(0-9) * DSP button is unavailable to SR7300.
S-DIRECT Selects the Source Direct mode
NIGHT(+10) Turns on or off NIGHT mode
MUTE Decreases the sound temporarily
BASS
34
Adjusts the tone control of low frequency sound
TREBLE
34
Adjusts the tone control of high frequency sound
VOL
34
Adjusts the over all sound level
MENU/OSD Displays the current setting on the monitor
Cursor Moves the cursor for setting in “On screen display” mode
OK • Enter the “On screen display”
•Confirms the setting in “On screen display” mode
SETUP
Same as OK button
CH SEL
Calls up SETUP MENU and adjusts speaker levels or 7.1ch input level
TEST Enters the test tone menu
EXIT Exits from SETUP MAIN MENU
SPKR A/B Selects the speaker system
ATT Reduces the input level
MULTI Turns the multi room mode on or off
Function selector Selects a particular source component
TUNER MODE
0-9 Inputs the numeric
DISP./RDS Selects the display mode in RDS (*)
F.DIR/SEAR Selects the “Frequency direct input”
PTY Displays the program type information of the current station (*)
MEMO Enters the tuner preset memory numbers
CL Clears the inputting
T.MODE Selects the auto stereo mode or mono mode
P.SCAN Starts preset scan
CHANNEL/SKIP • Selects a preset station
• Changes a PTY type
TUNE/SEARCH Tunes a station
TUNER Selects a frequency band
AMP MODE
(*): European model only