Filter
Top Products
34
Playback (Basic operation)
Setup (vpage27)
n Turning the power on (vpage34)
n Selecting the input source (vpage34)
n Adjusting the master volume (vpage35)
n Turning off the sound temporarily (vpage35)
n Playing a Blu-ray Disc player/DVD player
(vpage35)
n Playing a CD player (vpage35)
n Playing an iPod (vpage36)
n Playing a USB memory device (vpage39)
n Listening to FM broadcasts (vpage42)
n Listening to internet radio (vpage50)
n Playing back files stored on a PC and NAS
(vpage53)
n Using online services (vpage57)
n Convenient functions (vpage65)
n AirPlay function (vpage69)
Selecting a listening mode (Sound Mode)
(vpage71)
Playback (Advanced operation) (vpage91)
Important information
Before starting playback, make the connections between the different
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices
when playing them.
Turning the power on
Press POWER X to turn on power to
the unit.
The power turns on.
You can also switch the power to standby by pressing X ON/
STANDBY
on the main unit.
n When power is switched to standby
Press POWER X.
GSTANDBY indicator status in standby modeH
•Normal standby : Red
•When “HDMI Control” (vpage112) is set to “On” : Orange
•When “IP Control” (vpage 125) is set to “Always On” :
Orange
Selecting the input source
Press the input source select button
(CBL/SAT, DVD, Blu-ray, GAME,
AUX, MEDIA PLAYER, TV AUDIO,
CD, TUNER, iPod/USB, M-XPort,
NETWORK or INTERNET RADIO) to
be played back.
The desired input source can be selected
directly.
You can also use the following operation to select an input
source.
n Select the input source using the main unit
Turn INPUT SELECTOR.
•Turning INPUT SELECTOR switches the input source, as shown
below.
GAME AUX MEDIA PLAYER
iPod/USBFMM-XPort NETWORK CDTV AUDIO
Blu-rayDVDCBL/SAT
Basic version
Advanced version
Information
Basic version
DVD